Buy a $2,000,000 building with an SBA 504 loan and you can put down $200,000 instead of the $500,000 a 25%-down commercial mortgage would take. A bank lends half, a Certified Development Company (CDC) lends up to 40% at a fixed rate, and you bring 10%. In November 2026, CDCs published 25-year 504 effective rates of about 6.57% to 6.58%.
Key takeaways
- The usual 504 split is 50% bank loan, 40% CDC/SBA loan and 10% from you. Startups and special-purpose buildings need 15%, or 20% if both apply.
- November 2026 pricing (completed Nov. 5) put the 25-year 504 effective rate at 6.57% and the 20-year at 6.58%, per SomerCor’s published table.
- The SBA portion is generally capped at $5 million. Small manufacturers and certain energy projects can go to $5.5 million per project.
- The 504 debenture carries a prepayment premium that steps down each year and disappears after year 10 on 20- and 25-year loans.
If you’re still sorting out which SBA program fits, start with the full guide to SBA loan types and costs. This article goes deep on the 504 only.
What an SBA 504 loan is
A 504 loan finances major fixed assets, mainly owner-occupied real estate and long-life equipment. It’s two loans plus your cash, stacked together.
SBA’s rules (13 CFR 120.900) describe the typical mix: the borrower puts in 10%, a third-party lender (usually a bank) provides 50%, and the 504 loan covers 40%. The bank takes the first lien. The 504 loan usually sits in second position on the project property.
The 504 piece comes from a CDC, a nonprofit certified by SBA. The CDC funds its share with a debenture, a bond SBA guarantees 100%. That guarantee is why the 40% portion can carry a long fixed rate.
| Layer | Typical share | Who provides it | Rate type |
|---|---|---|---|
| First lien loan | 50% | Bank or other third-party lender | Set by the bank (fixed or variable) |
| 504 loan (debenture) | Up to 40% | CDC, backed by SBA | Fixed for 10, 20 or 25 years |
| Borrower contribution | 10% (15% or 20% in some cases) | You | Not applicable |
504 loan down payment: when it’s 10%, 15% or 20%
The down payment rule is in 13 CFR 120.910. It’s measured against the project cost, not counting administrative costs.
- 10% is the standard contribution.
- 15% if your business has operated for two years or less.
- 15% if the project is a limited- or single-purpose building.
- 20% if both apply: a newer business buying a special-purpose property.
In the startup and special-purpose cases, the bank’s loan must also be at least 50% of the project cost (13 CFR 120.920). And in every case, the bank loan must at least equal the 504 loan.
Good to know: On that $2,000,000 building, 15% down is $300,000 and 20% is $400,000. Even at 20%, you still keep $100,000 more cash than with 25% down.
SBA 504 loan requirements
Eligible business
The business must operate for profit in the U.S., meet SBA size standards and not be an ineligible type, such as a passive or speculative business. SBA also looks for management experience, a feasible plan and the ability to repay.
Since March 1, 2026, the business must also be 100% owned, directly and indirectly, by U.S. citizens or U.S. nationals whose principal residence is in the U.S. (SBA Procedural Notice 5000-876626). Green card holders can’t hold any stake. The SBA 7(a) loan requirements guide covers the details, which are the same for 7(a) and 504.
The net worth and net income test
You can qualify under your industry’s size standard. Or you can use SBA’s alternative size standard. Under the rule effective March 18, 2024, a business qualifies if its tangible net worth is no more than $20 million and its average net income after federal income taxes for the two prior completed fiscal years is no more than $6.5 million. Affiliates count in both tests.
Owner occupancy
A 504 isn’t for landlords. Under 13 CFR 120.131, you must occupy at least 51% of an existing building and may lease out up to 49%. For new construction, you must occupy at least 60% and may permanently lease up to 20%.
Common mistake: Buying a multi-tenant building and planning to fill only 40% of it yourself. That fails the 51% test. Rental real estate investment is a separate world, covered in the real estate investing guide.
Jobs or a public policy goal
Each 504 project must meet a job target or another economic development goal. For loans approved on or after October 1, 2025, SBA raised the numbers. A project must create or retain one job per $95,000 guaranteed by SBA. For small manufacturers and energy-goal projects, it’s one job per $150,000. The prior figures were $90,000 and $140,000.
Projects short on jobs can still qualify through a public policy goal in 13 CFR 120.862, such as expanding exports, rural development, expanding women-, veteran- or minority-owned businesses, or cutting energy use by at least 10%.
What you can use a 504 for
SBA lists these eligible uses:
- Buying, building or renovating buildings, or buying land.
- Long-term machinery and equipment with at least 10 years of remaining useful life.
- Refinancing qualified debt, under the conditions in 13 CFR 120.882.
You can’t use a 504 for working capital or inventory. You also can’t use it to speculate or invest in rental real estate.
Refinancing rules
A final rule effective November 15, 2024, loosened 504 refinancing. Two paths exist:
- Refinancing with an expansion. Existing debt up to 100% of the expansion’s project cost can be rolled in. At least 75% of that old debt must have paid for fixed assets like land, buildings or equipment. The new payment on the refinanced portion must be lower than the old one.
- Refinancing without an expansion. The business must have operated for the full two years before applying. The bank loan plus the 504 loan can’t exceed 90% of the collateral’s fair market value. You still need at least 10% equity in the project (15% for special-purpose property).
For more on how lenders size property loans, see commercial real estate financing, DSCR and LTV.
How big a 504 can get
Under 13 CFR 120.931, the SBA portion is capped at $5 million per borrower, including affiliates. It rises to $5.5 million per project for small manufacturers (NAICS 31–33 with all production in the U.S.) and for projects that cut energy use by at least 10% or upgrade renewable energy production. SBA’s own 504 page lists $5.5 million as the maximum.
This cap covers only the 40% piece, not the bank’s 50%.
Two 2026 changes matter here. Since July 4, 2026, qualified borrowers who get a 7(a) loan first can hold up to $5 million in 7(a) and up to $5 million in 504, for $10 million combined. And SBA says small manufacturers can get an unlimited number of 504 loans, as long as each one is tied to a distinct project.
SBA 504 loan rates: how they’re set
You don’t negotiate the 504 rate. SBA pools approved debentures and sells them to investors on a monthly schedule. SBA says the rate is pegged to an increment above the current 10-year U.S. Treasury rate.
CDCs then publish an “effective rate.” That figure folds in the debenture rate plus the program’s ongoing fees. Small differences in CDC fees explain why two CDCs can post rates a basis point apart for the same month.
| Term | Standard 504 | Manufacturing, food supply chain and rural* | Refinance |
|---|---|---|---|
| 25-year | 6.57% | 6.34% | 6.58% |
| 20-year | 6.58% | 6.33% | 6.58% |
| 10-year | 6.58% | 6.29% | 6.58% |
Source: SomerCor’s November 2026 rate table, pricing completed Nov. 5, 2026. *About 25 basis points lower because the upfront guaranty and annual service fees are waived for these borrowers in FY2027, per SomerCor. 504 Corporation’s November table shows 6.58% (25-year) and 6.59% (20-year).
That rate is fixed only on the CDC’s 40%. Your bank’s 50% has its own rate and terms. Under SBA rules, the bank loan must run at least 7 years alongside a 10-year 504 and at least 10 years alongside a 20- or 25-year 504.
Terms, fees and the prepayment penalty
Terms
504 loans come in 10-, 20- and 25-year maturities. The 25-year option has been available for projects approved since April 2, 2018.
Fees
SBA says 504 fees total about 3% of the debt and can be financed into the loan. The regulations (13 CFR 120.971) allow a CDC processing fee of up to 1.5% of net debenture proceeds, a reasonable closing fee, and an annual servicing fee on the unpaid balance. A late payment after the 15th of the month costs 5% of the payment or $100, whichever is more. Your bank will charge its own fees on the first lien.
Practical tip: Ask the CDC for a sources-and-uses sheet that shows the gross debenture amount after financed fees. When fees are financed, the debenture you repay is a bit larger than the net 40% figure.
Prepayment premium
The 504 debenture (SBA Form 1504) charges a repurchase premium if you pay it off early. The formula is the remaining balance times the interest rate times a yearly factor.
- 20- and 25-year loans: the factor starts at 1.00 in year 1 and drops 0.10 a year. It hits zero in year 11.
- 10-year loans: the factor starts at 1.00 and drops 0.20 a year. It hits zero in year 6.
Say you owe $800,000 on a debenture with a 6% note rate (a round number for illustration) and sell the building in year 1. The premium would be $800,000 × 0.06 × 1.00 = $48,000. If you might sell within a few years, factor that in.
Worked example: a $2,000,000 building
The assumptions: a $2,000,000 owner-occupied building, standard 10% down. The bank rate of 7.25% is illustrative, not a quote. The CDC portion uses the verified November 2026 25-year effective rate of 6.57%. Both loans amortize over 25 years. The conventional loan is an illustrative 75% loan-to-value mortgage at 7.25%, also over 25 years.
| Item | SBA 504 | Conventional (25% down) |
|---|---|---|
| Cash down | $200,000 | $500,000 |
| Bank loan | $1,000,000 at 7.25% | $1,500,000 at 7.25% |
| CDC/SBA loan | $800,000 at 6.57% | None |
| Monthly payment, bank | $7,228.07 | $10,842.10 |
| Monthly payment, CDC | $5,436.70 | None |
| Total monthly payment | $12,664.77 | $10,842.10 |
| Blended rate on borrowed money | About 6.95% | 7.25% |
The 504 keeps $300,000 more cash in your business on day one.
The trade-off is real, though. You borrow $300,000 more, so the monthly payment is $1,822.67 higher. Over 25 years, total interest is about $1.999 million on the 504 structure versus about $1.753 million on the conventional loan. The 504 wins on cash and on blended rate. It doesn’t win on total interest, because you’re borrowing more.
Try your own numbers in the loan calculator to test different bank rates and terms. Ask how the bank’s piece is structured, since its rate and term can differ from the 504’s.
Practical tip: Park the cash you save in a separate operating account, not your main one, so it doesn’t get spent by accident. Compare options in the business checking accounts guide.
504 vs 7(a): which fits
| Feature | SBA 504 | SBA 7(a) |
|---|---|---|
| Best for | Owner-occupied real estate and long-life equipment | Working capital, equipment, real estate, buying a business, refinancing |
| Working capital | Not allowed | Allowed |
| Maximum SBA amount | $5 million ($5.5 million per project for manufacturers and energy projects) | $5 million |
| Structure | Bank 50%, CDC 40%, borrower 10%+ | One lender loan with a partial SBA guaranty |
| SBA guaranty | 100% of the debenture | Up to 85% on loans of $150,000 or less, up to 75% above that |
| Rate | Fixed on CDC portion, set monthly over 10-year Treasuries | Fixed or variable, negotiated within SBA maximums |
| Maximum term | 10, 20 or 25 years | 25 years for real estate, 10 for equipment and working capital |
| Who you apply with | A CDC plus a bank | An SBA-approved lender |
If you need working capital or want to buy a business, a 7(a) is the better fit. Check the SBA 7(a) loan requirements for that route, or the SBA Express loan if you need a smaller amount fast. For non-SBA options, see the commercial loans guide.
Frequently asked questions
What is the current SBA 504 loan rate?
For November 2026, pricing was completed on November 5. SomerCor’s table shows a 25-year effective rate of 6.57% and a 20-year rate of 6.58%. Other CDCs posted rates within about a basis point. The rate resets each month for new sales, but yours stays fixed once your debenture sells.
Can I really buy a building with 10% down?
Yes, if your business has operated more than two years and the building isn’t special-purpose. Newer businesses or special-purpose properties need 15%. If both apply, it’s 20%.
Can I rent out part of the building?
Yes, within limits. In an existing building you must occupy at least 51%. In new construction you must occupy at least 60%. SBA caps how much of the rest you can lease and for how long.
Can I use a 504 loan for working capital?
No. A 504 covers fixed assets like land, buildings and long-life equipment. For working capital, a 7(a) loan or a bank line of credit is the usual route.
Is there a penalty for paying off a 504 early?
Yes, on the debenture portion. The premium starts at a full year’s interest on the balance and steps down each year. It ends after year 10 on 20- and 25-year loans and after year 5 on 10-year loans. Your bank loan may have its own prepayment terms.
Sources: SBA 504 and 7(a) loan pages (sba.gov, accessed Nov. 20, 2026); 13 CFR Part 120 (govinfo.gov, 2025 ed.); Federal Register notices of Apr. 4, 2018, Feb. 15, 2024, Oct. 1, 2024 and Sept. 30, 2025; SBA Procedural Notice 5000-876626 (ownership and citizenship, effective Mar. 1, 2026); SBA Form 1504; SBA news releases of May 18 and July 7, 2026; SomerCor November 2026 504 rates (Nov. 5, 2026); 504 Corporation rates page (accessed Nov. 20, 2026). Calculations by FinInfoBlog. This article is for educational purposes and isn’t financial advice.

